Product Description
Doing work principle:
This machine use routines and the tooth plate relative movement among the set tooth plate, the content through the tooth plate effect, friction, shear, influence each other and get crushed substance.
The main goal:
This grinder is well-known in homes, drugstores, meals processing plants and SPA outlets.It is widely used in pharmaceutical, foods, chemical market components crushed.
1)A variety of grains: sesame, walnut, rice, black rice, soy, mung bean, peanut, lotus seed, corn, broomcorn, barley, buckwheat, oat, and many others.
2) dry medicinals :including almond ,tuckahoe,purple jujube,euryale seed,medlar,mastic,dodder seed,angelica and so on.
The equipment characteristics:
1) There is minor noise, and the equipment is stable when it functions.
2) With overload defense reminding to guarantee your basic safety
three)The equipment can grind all types of foods and medicines into twenty~200 meshes.
four)Easy operation,non dust and fine powder.
5)No monitor,and the thickness can be adjusted.
six)Stainless metal ,construction is basic, reduced vitality, straightforward to cleanse, is the perfect grinding equipment.
Software
Processing procedure:
one. into the substance
2. drive the blanking valve (press off CZPT , sluggish down).
three. open the CZPT swap and observe the dimensions of the powder.
four. effectively pulverized
Construction composition:
1. hopper
2. valve regulating valve
three. screwdriver lock
four. comminuted thickness
5. outlet
6. sturdy magnetic adsorption
7. switch
8. stainless steel hood
nine. heat dissipation gap
ten mats
Design |
Voltage |
Electrical power |
Rotation CZPT (t/m) |
Capacity(KG/h) |
Packing Size |
HDC-1800 |
220V/50Hz |
1800W |
1500 |
65KGS |
71.5X34.5X35CM |
HDC-2200 |
220V/50Hz |
2200W |
1500 |
65KGS |
71.5X34.5X35CM |
HDC-3000 |
220V/50Hz |
3000W |
1500 |
65KGS |
seventy one.5X38X38CM |
HDC-3600 |
220V/51Hz |
3600W |
1500 |
66KGS |
seventy six.3×36.5×39.6CM |
Delivery:
FAQ:
one,What is the voltage/phase for this equipment ?
220V 50Hz/solitary phase ,380V 50Hz/3 period , 110V 60Hz/single stage also can produced as theclients’ need
two,What is the Manner of transportation ?
LCL and FCL by ship ,By Convey (DHL,TNT, Fedex etc) ,By air
three,How CZPT can we get the merchandise?
we usually delivery in 3-5 operating days, we will tell you delivery time dependent on your seaport.
Set up 1.1. Thoroughly clean all oil, filth and paint from shafts, bushing holes, bushing exterior and holes of components (sprockets, pulleys, and many others.). Insert the bushing into the assembly. 3. Match the sample of holes, not threaded holes (each and every gap is threaded on one side only). Insert the socket head cap screws or screws into the 50 %-threaded holes shown in the graphic beneath. Install the assembly on the shaft. 4. Convert the torque placing or include screw* to the recommended torque environment in the diagram beneath. Fill any unfilled holes with grease.