China Vacuum Sintering Furnace (SiC/Si3N4/AlN) Industrial Furnace with ce certificate top quality Good price

Product Description

Description
The furnace is utilized for response sintering, low stress sintering, re-crystal sintering of ceramic solution, and it can also utilised for generation of ceramic powder. It has each horizontal and vertical structures.

Application: Ceramic products this kind of as SiC, silicon nitride and aluminum nitride.

Technical Functions

1.Employing exclusive ACME super high temperature and higher present CZPT offer technological innovation, it can CZPT time period stable use at high temperature

2.Employing particular made substantial temperature pyro-meter measuring engineering with precision temperature control and little deviation

3.Set up with unique sealing muffle to reduce the silicon vapor and exhaust gasoline contamination to the heating factor and insulation

four.Mounted substantial performance exhaust gasoline treatment method gadget , which is setting-friendly and handy to thoroughly clean

5.It has debinding method, to full debinding and sintering approach in one particular furnace at 1 time.

Optional Configuration of Vacuum Sintering Furnace

1.Furnace door: screw/hydraulic/manual elevation guide tight/vehicle lock-ring limited

two.Furnace vessel: all carbon metal/interior layer stainless steel/all stainless steel

3.Furnace sizzling zone: gentle carbon felt/delicate graphite felt/rigid composite board/CFC

4.Heating component and muffle: isostatic push graphite/large purity, power and density graphite/fantastic dimension graphite

five.Approach fuel method: volume/mass stream-meter guide/car valve

six.Thermocouple: C variety/S kind/R sort/B type

7.Pyro-meter:Twin-shade/Single shade CZPT NO/Raytek

ModelSpec

Working Zone Size 

(W×H×L) (mm)

Max. Temperature (°C) Temperature Uniformity (°C) Ultimate Vacuum (Pa) Pressure Increase Fee (Pa/h)
HVSF- 0571 1 500×500×1100 1900/2400 ±5 1-100 .sixty seven
HVSF-060612 600×600×1200 1900/2400 ±5 1-one hundred .67
HVSF-100612 1000×600×1200 1900/2400 ±10 1-a hundred .67
HVSF-ten 0571 1000×800×2500 1900/2400 ±10 1-a hundred .sixty seven
HVSF-100840 1000×800×4000 1900/2400 ±10 1-one hundred .67
 
VVSF-0612 φ600×1200 1900/2400 ±7.five 1-a hundred 0.sixty seven
VVSF-0918 φ900×1800 1900/2400 ±10 1-one hundred 0.sixty seven
VVSF-1120 φ1100×2000 1900/2400 ±10 1-100 0.sixty seven
The above parameters can be adjusted to the approach demands, they are not as acceptance common, the depth spec. will be said in the technical proposal and agreements.

Specs of Vacuum Sintering Furnace

 

 

China Vacuum Sintering Furnace (SiC/Si3N4/AlN) Industrial Furnace with ce certificate top quality Good price